Installation Tips for Home Water Softeners

Home / Uncategorized / Installation Tips for Home Water Softeners

Water that does not run through home water softeners before getting piped through the plumbing is not 100 percent pure. Indeed, Mike Beebe helped me to know that unprocessed water or water that isn’t purified normally contains minerals like magnesium and calcium. The more magnesium and calcium in your water, the harder it is.

GPG or the grains per gallon determines water hardness. The acceptable standard is one to ten GPG, while eleven to eighteen GPG is acceptable. However, when it’s over eighteen GPG, it starts having a deleterious effect on your water pipes. This is the point where you have to do water treatment to reduce your GPG count.

Besides damaging your water pipes, hard water can also damage your appliances. The only way to minimize the harmful effects of hard water is to install home water softeners. There are different types of water softening systems with each one having its own installation instructions.

Firstly, what you need to realize about home water softeners installation is that the device has to be kept indoors in a place that’s dry with stable temperatures. If the system utilizes multiple tanks, keep the tanks close to each other in a location where they can access the brine tank easily as it would have to be refilled frequently.

Here are some helpful tips for installing home water softeners that Mike Beebe helped me to know:

1. Do your homework

As when installing other units in your home it’s important to do reading about installing the water softener system. Make sure to read the instructions a few times. You should also read the warnings and other information in the manual. This will help you to install the unit correctly and safely, which should be one of the main goals.

One option is to consult an expert to help you install the water softener system. This can make the process easier since they have the know-how and experience to make the entire process go smoother. However, if it’s your first time to install such a unit it can be very challenging and cause a lot of issues along the way. That’s likely a situation you’ll want to avoid.

As always it’s important to get all the information you need to make the process of installing the unit as smooth as possible. This is critical because if you don’t take this step it’s more likely you’ll have problems when you install the water softener system.

2. Contact a plumber before you start the work. This is important because they can help to provide info and help about any key issues you might have to deal with when installing the water softener unit. The more info you have before the installation the more likely you can avoid major issues.

3. Pick the right location

The old saying “location, location, location” definitely applies when installing a water softener system. This is one of the most important issues to weigh when installing a system. You should also think about how much water you’ll be using on a daily basis. This is critical to make sure you pick the right unit for your home. It takes some basic calculations but can help to produce the best results when installing the unit.

4. Turn off water lines

This is important when installing the water softener. The process is very easy. It just involves the valve off at the lowest/highest points in your home. This is an important step since it can avoid any currents in the process of installing the water softener system. That’s definitely a situation you’ll want to avoid. This step is a fairly easy one but one you should definitely do in order to get the best results when you install the unit.

5. Check the temperature of piping area

Make sure the area is above freezing. A good option is beside an electrical outlet. The piping should also be close to the water line and main drain.

6. Add piping

The apes should be 10 feet and be installed between the water softener in your home and the heater. Make sure you put it in a dry area and not near any light. This will help to prevent a lot of major problems. If you’re not too familiar with this process then you should consult an expert to get some helpful info to get everything done right.